HP StorageWorks Fabric OS 5.X Diagnostics and System Error Messages Reference Guide (AA-RVHZB-TE, September 2005)

238 Error messages
Probable Cause
Indicates that the number of invalid certificates has fallen below the low boundary. This violation indicates
that a packet with an invalid certificate has been received from the primary FCS. Before a new primary
FCS switch sends any configuration data to any switch in the fabric, it first sends its certificate to all the
switches in the fabric. The receiving switch has to verify that the sender is the primary FCS switch and its
certificate is signed by the Root CA recognized by the receiving switch. This counter keeps track of the
number of packets received with invalid certificates.
Recommended Action
No action is required.
Severity
INFO
FW-1354
Message
Probable Cause
Indicates that the number of invalid certificates has risen above the high boundary. This violation indicates
that a packet with an invalid certificate has been received from the primary FCS. Before a new primary
FCS switch sends any configuration data to any switch in the fabric, it first sends its certificate to all the
switches in the fabric. The receiving switch has to verify that the sender is the primary FCS switch and its
certificate is signed by the Root CA recognized by the receiving switch. This counter keeps track of the
number of packets received with invalid certificates.
Recommended Action
Responses to security-class messages depend on user policies. Consult your security administrator for
response strategies and policies.
Severity
WARNING
FW-1355
Message
Probable Cause
Indicates that the number of invalid certificates has changed from a value outside of the acceptable range
to a value within the acceptable range. This violation indicates that a packet with an invalid certificate has
been received from the primary FCS. Before a new primary FCS switch sends any configuration data to
any switch in the fabric, it first sends its certificate to all the switches in the fabric. The receiving switch has
to verify that the sender is the primary FCS switch and its certificate is signed by the Root CA recognized
by the receiving switch. This counter keeps track of the number of packets received with invalid certificates.
Recommended Action
No action is required.
<timestamp>, [FW-1354], <sequence-number>,, WARNING, <system-name>,
<Label>, is above high boundary(High=<High value>, Low=<Low
value>). Current value is <Value> <Unit>.
<timestamp>, [FW-1355], <sequence-number>,, INFO, <system-name>,
<Label>, is between high and low boundaries(High=<High value>,
Low=<Low value>). Current value is <Value> <Unit>.