HP StorageWorks Fabric OS 5.X Diagnostics and System Error Messages Reference Guide (AA-RVHZB-TE, September 2005)

230 Error messages
Recommended Action
No action is required.
Severity
INFO
FW-1334
Message
Probable Cause
Indicates that the number of SCC violations has risen above the high boundary. SCC violations indicate
that an unauthorized switch tried to join the fabric. The SCC_POLICY contains a list of switches by WWN
that are allowed to be members of a fabric.
Recommended Action
Run the errShow command to determine the WWN of the device that sent the request. Responses to
security-class messages depend on user policies. Consult your security administrator for response strategies
and policies.
Severity
WARNING
FW-1335
Message
Probable Cause
Indicates that the number of SCC violations has changed from a value outside of the acceptable range to
a value within the acceptable range. SCC violations indicate that an unauthorized switch tried to join the
fabric. The SCC_POLICY contains a list of switches by WWN that are allowed to be members of a fabric.
Recommended Action
No action is required.
Severity
INFO
FW-1336
Message
<timestamp>, [FW-1334], <sequence-number>,, WARNING, <system-name>,
<Label>, is above high boundary(High=<High value>, Low=<Low
value>). Current value is <Value> <Unit>.
<timestamp>, [FW-1335], <sequence-number>,, INFO, <system-name>,
<Label>, is between high and low boundaries(High=<High value>,
Low=<Low value>). Current value is <Value> <Unit>.
<timestamp>, [FW-1336], <sequence-number>,, INFO, <system-name>,
<Label>, value has changed(High=<High value>, Low=<Low value>).
Current value is <Value> <Unit>.