HP StorageWorks Fabric OS 5.X Diagnostics and System Error Messages Reference Guide (AA-RVHZB-TE, September 2005)

Fabric OS 5.x diagnostics and system error messages reference guide 227
Recommended Action
No action is required.
Severity
INFO
FW-1326
Message
Probable Cause
Indicates that the number of serial violations has risen above the high boundary. Serial violations indicate
that an unauthorized serial port request has been received. The SERIAL_POLICY contains a list of switch
WWNs for which serial port access is enabled.
Recommended Action
Run the errShow command to determine the WWN of the device that sent the request. Responses to
security-class messages depend on user policies. Consult your security administrator for response strategies
and policies.
Severity
WARNING
FW-1327
Message
Probable Cause
Indicates that the number of serial violations has changed from a value outside of the acceptable range to
a value within the acceptable range. Serial violations indicate that an unauthorized serial port request has
been received. The SERIAL_POLICY contains a list of switch WWNs for which serial port access is
enabled.
Recommended Action
No action is required.
Severity
INFO
FW-1328
Message
<timestamp>, [FW-1326], <sequence-number>,, WARNING, <system-name>,
<Label>, is above high boundary(High=<High value>, Low=<Low
value>). Current value is <Value> <Unit>.
<timestamp>, [FW-1327], <sequence-number>,, INFO, <system-name>,
<Label>, is between high and low boundaries(High=<High value>,
Low=<Low value>). Current value is <Value> <Unit>.
<timestamp>, [FW-1328], <sequence-number>,, INFO, <system-name>,
<Label>, value has changed(High=<High value>, Low=<Low value>).
Current value is <Value> <Unit>.