Manualshelf

HP StorageWorks Fabric OS 5.X Diagnostics and System Error Messages Reference Guide (AA-RVHZB-TE, September 2005)

ManualsBrandsHP ManualsStorageHP StorageWorks Core Switch 2/64 power pack
211212213214215216217218219220
Fabric OS 5.x diagnostics and system error messages reference guide 219
addresses that are authorized to establish API connections to switches in the fabric. The IP addresses use
standard "dot" notation (for example, 255.255.255.255).
Recommended Action
Run the errShow command to determine the IP address that sent the request. Responses to security-class
messages depend on user policies. Consult your security administrator for response strategies and policies.
Severity
INFO
FW-1305
Message
Probable Cause
Indicates that the number of API violations has fallen below the low boundary. API violations indicate that
an API connection request has been received from an unauthorized IP address. The SNMP_POLICY
contains a list of TCP/IP addresses that are authorized to establish API connections to switches in the
fabric. The IP addresses use standard "dot" notation (for example, 255.255.255.255).
Recommended Action
No action is required.
Severity
INFO
FW-1306
Message
Probable Cause
Indicates that the number of API violations has risen above the high boundary. API violations indicate that
an API connection request has been received from an unauthorized IP address. The SNMP_POLICY
contains a list of TCP/IP addresses that are authorized to establish API connections to switches in the
fabric. The IP addresses use standard "dot" notation (for example, 255.255.255.255).
Recommended Action
Run the errShow command to determine the IP address that sent the request. Responses to security-class
messages depend on user policies. Consult your security administrator for response strategies and policies.
Severity
WARNING
<timestamp>, [FW-1305], <sequence-number>,, INFO, <system-name>,
<Label>, is below low boundary(High=<High value>, Low=<Low value>).
Current value is <Value> <Unit>.
<timestamp>, [FW-1306], <sequence-number>,, WARNING, <system-name>,
<Label>, is above high boundary(High=<High value>, Low=<Low
value>). Current value is <Value> <Unit>.