HP StorageWorks Fabric OS 5.X Diagnostics and System Error Messages Reference Guide (AA-RVHZB-TE, September 2005)

Fabric OS 5.x diagnostics and system error messages reference guide 217
authorized to establish telnet connections to switches in the fabric. The IP addresses use standard "dot"
notation (for example, 255.255.255.255).
Recommended Action
No action is required.
Severity
INFO
FW-1300
Message
Probable Cause
Indicates that the number of HTTP violations has changed. HTTP violations indicate that a browser
connection request has been received from an unauthorized IP address. The HTTP_POLICY contains a list of
TCP/IP addresses that are authorized to establish browser connections to the switches in the fabric. The IP
addresses use the standard "dot" notation (for example, 255.255.255.255).
Recommended Action
Run the errShow command to determine the IP address that sent the request. Responses to security-class
messages depend on user policies. Consult your security administrator for response strategies and policies.
Severity
INFO
FW-1301
Message
Probable Cause
Indicates that the number of HTTP violations has fallen below the low boundary. HTTP violations indicate
that a browser connection request has been received from an unauthorized IP address. The HTTP_POLICY
contains a list of TCP/IP addresses that are authorized to establish browser connections to the switches in
the fabric. The IP addresses use the standard "dot" notation (for example, 255.255.255.255).
Recommended Action
No action is required.
Severity
INFO
<timestamp>, [FW-1300], <sequence-number>,, INFO, <system-name>,
<Label>, value has changed(High=<High value>, Low=<Low value>).
Current value is <Value> <Unit>.
<timestamp>, [FW-1301], <sequence-number>,, INFO, <system-name>,
<Label>, is below low boundary(High=<High value>, Low=<Low value>).
Current value is <Value> <Unit>.