HP StorageWorks Fabric OS 5.X Diagnostics and System Error Messages Reference Guide (AA-RVHZB-TE, September 2005)

Fabric OS 5.x diagnostics and system error messages reference guide 215
Recommended Action
No action is required. Respond to this message as is appropriate to the particular policy of the end-user
installation.
Severity
INFO
FW-1275
Message
Probable Cause
Indicates that the number of frame types or commands that the port receives has changed from a value
outside of the acceptable range to a value within the acceptable range. The port has received SCSI Read,
SCSI Write, SCSI Read and Write, SCSI Traffic, or IP commands in a frame.
Recommended Action
No action is required. Respond to this message as is appropriate to the particular policy of the end-user
installation.
Severity
INFO
FW-1296
Message
Probable Cause
Indicates that the number of telnet violations has changed. Telnet violations indicate that a telnet
connection request has been received from an unauthorized IP address. The TELNET_POLICY contains a list
of TCP/IP addresses that are authorized to establish telnet connections to switches in the fabric. The IP
addresses use standard "dot" notation (for example, 255.255.255.255).
Recommended Action
Run the errShow command to determine the IP address that sent the request. Responses to security-class
messages depend on user policies. Consult your security administrator for response strategies and policies.
Severity
INFO
<timestamp>, [FW-1275], <sequence-number>,, INFO, <system-name>,
<Label>, is between high and low boundaries(High=<High value>,
Low=<Low value>). Current value is <Value> <Unit>.
<timestamp>, [FW-1296], <sequence-number>,, INFO, <system-name>,
<Label>, value has changed(High=<High value>, Low=<Low value>).
Current value is <Value> <Unit>.