HP StorageWorks Fabric OS 5.X Diagnostics and System Error Messages Reference Guide (AA-RVHZB-TE, September 2005)

204 Error messages
FW-1186
Message
Probable Cause
Indicates that the percentage of incoming traffic that the port experiences has risen above the high
boundary.
Recommended Action
No action is required. Respond to this message as is appropriate to the particular policy of the end-user
installation.
Severity
INFO
FW-1187
Message
Probable Cause
Indicates that the percentage of incoming traffic that the port experiences has changed from a value
outside of the acceptable range to a value within the acceptable range.
Recommended Action
No action is required. Respond to this message as is appropriate to the particular policy of the end-user
installation.
Severity
INFO
FW-1188
Message
Probable Cause
Indicates that the percentage of outgoing traffic that the port experiences has changed.
Recommended Action
No action is required. Respond to this message as is appropriate to the particular policy of the end-user
installation.
<timestamp>, [FW-1186], <sequence-number>,, INFO, <system-name>,
<Port Name>, <Label>, is above high boundary(High=<High value>,
Low=<Low value>). Current value is <Value> <Unit>.
<timestamp>, [FW-1187], <sequence-number>,, INFO, <system-name>,
<Port Name>, <Label>, is between high and low boundaries(High=<High
value>, Low=<Low value>). Current value is <Value> <Unit>.
<timestamp>, [FW-1188], <sequence-number>,, INFO, <system-name>,
<Port Name>, <Label>, value has changed(High=<High value>, Low=<Low
value>). Current value is <Value> <Unit>.