HP StorageWorks Fabric OS 5.X Diagnostics and System Error Messages Reference Guide (AA-RVHZB-TE, September 2005)

Fabric OS 5.x diagnostics and system error messages reference guide 203
Probable Cause
Indicates that the number of invalid CRCs that the port experiences has changed from a value outside of
the acceptable range to a value within the acceptable range.
Recommended Action
No action is required. Respond to this message as is appropriate to the particular policy of the end-user
installation. Frequent fluctuations in CRC errors generally indicate an aging fabric. Check your SFPs,
cables, and connections for faulty hardware. Verify that all optical hardware is clean.
Severity
INFO
FW-1184
Message
Probable Cause
Indicates that the percentage of incoming traffic that the port experiences has changed.
Recommended Action
No action is required. Respond to this message as is appropriate to the particular policy of the end-user
installation.
Severity
INFO
FW-1185
Message
Probable Cause
Indicates that the percentage of incoming traffic that the port experiences has fallen below the low
boundary.
Recommended Action
No action is required. Respond to this message as is appropriate to the particular policy of the end-user
installation.
Severity
INFO
<timestamp>, [FW-1184], <sequence-number>,, INFO, <system-name>,
<Port Name>, <Label>, value has changed(High=<High value>, Low=<Low
value>). Current value is <Value> <Unit>.
<timestamp>, [FW-1185], <sequence-number>,, INFO, <system-name>,
<Port Name>, <Label>, is below low boundary(High=<High value>,
Low=<Low value>). Current value is <Value> <Unit>.