HP StorageWorks Fabric OS 5.X Diagnostics and System Error Messages Reference Guide (AA-RVHZB-TE, September 2005)

202 Error messages
Probable Cause
Indicates that the number of invalid CRCs that the port experiences has changed.
Recommended Action
No action is required. Respond to this message as is appropriate to the particular policy of the end-user
installation. Frequent fluctuations in CRC errors generally indicate an aging fabric. Check your SFPs,
cables, and connections for faulty hardware. Verify that all optical hardware is clean.
Severity
INFO
FW-1181
Message
Probable Cause
Indicates that the number of invalid CRCs that the port experiences has fallen below the low boundary.
Recommended Action
No action is required. Respond to this message as is appropriate to the particular policy of the end-user
installation. A low number of invalid CRCs means that the switch is functioning normally.
Severity
INFO
FW-1182
Message
Probable Cause
Indicates that the number of invalid CRCs that the port experiences has risen above the high boundary.
Recommended Action
This error generally indicates an deteriorating fabric hardware. Check your SFPs, cables, and connections
for faulty hardware. Verify that all optical hardware is clean.
Severity
WARNING
FW-1183
Message
<timestamp>, [FW-1181], <sequence-number>,, INFO, <system-name>,
<Port Name>, <Label>, is below low boundary(High=<High value>,
Low=<Low value>). Current value is <Value> <Unit>.
<timestamp>, [FW-1182], <sequence-number>,, WARNING, <system-name>,
<Port Name>, <Label>, is above high boundary(High=<High value>,
Low=<Low value>). Current value is <Value> <Unit>.
<timestamp>, [FW-1183], <sequence-number>,, INFO, <system-name>,
<Port Name>, <Label>, is between high and low boundaries(High=<High
value>, Low=<Low value>). Current value is <Value> <Unit>.