HP StorageWorks Fabric OS 5.X Diagnostics and System Error Messages Reference Guide (AA-RVHZB-TE, September 2005)

200 Error messages
Severity
WARNING
FW-1175
Message
Probable Cause
Indicates that the number of protocol errors that the port experiences has changed from a value outside of
the acceptable range to a value within the acceptable range. Occasional protocol errors occur due to
software glitches. Persistent protocol errors occur due to hardware problems.
Recommended Action
No action is required. Respond to this message as is appropriate to the particular policy of the end-user
installation.
Severity
INFO
FW-1176
Message
Probable Cause
Indicates that the number of invalid words that the port experiences has changed. Invalid words usually
indicate a hardware problem with an SFP or cable.
Recommended Action
Check both ends of your connections, your SFP, and your cable to verify that none are faulty.
Severity
INFO
FW-1177
Message
Probable Cause
Indicates that the number of invalid words that the port experiences has fallen below the low boundary.
Invalid words usually indicate a hardware problem with an SFP or cable.
<timestamp>, [FW-1175], <sequence-number>,, INFO, <system-name>,
<Port Name>, <Label>, is between high and low boundaries(High=<High
value>, Low=<Low value>). Current value is <Value> <Unit>.
<timestamp>, [FW-1176], <sequence-number>,, INFO, <system-name>,
<Port Name>, <Label>, value has changed(High=<High value>, Low=<Low
value>). Current value is <Value> <Unit>.
<timestamp>, [FW-1177], <sequence-number>,, INFO, <system-name>,
<Port Name>, <Label>, is below low boundary(High=<High value>,
Low=<Low value>). Current value is <Value> <Unit>.