HP StorageWorks Fabric OS 5.X Diagnostics and System Error Messages Reference Guide (AA-RVHZB-TE, September 2005)

Fabric OS 5.x diagnostics and system error messages reference guide 197
Recommended Action
Check both ends of your cable connection. Verify that the cable and SFPs are not faulty.
If you continue to experience loss-of-synchronization errors, troubleshoot your HBA and contact your switch
service provider.
Severity
WARNING
FW-1167
Message
Probable Cause
Indicates that the number of synchronization losses that the port experiences has changed from a value
outside of the acceptable range to a value within the acceptable range. Loss of synchronization errors
frequently occur due to a faulty SFP or cable. Signal losses often create synchronization losses.
Recommended Action
No action is required. Respond to this message as is appropriate to the particular policy of the end-user
installation.
Severity
INFO
FW-1168
Message
Probable Cause
Indicates that the number of signal losses that the port experiences has changed. Loss of signal generally
indicates a physical problem.
Recommended Action
Check both ends of your cable connection. Verify that the cable and SFPs are not faulty.
Severity
INFO
FW-1169
Message
<timestamp>, [FW-1167], <sequence-number>,, INFO, <system-name>,
<Port Name>, <Label>, is between high and low boundaries(High=<High
value>, Low=<Low value>). Current value is <Value> <Unit>.
<timestamp>, [FW-1168], <sequence-number>,, INFO, <system-name>,
<Port Name>, <Label>, value has changed(High=<High value>, Low=<Low
value>). Current value is <Value> <Unit>.
<timestamp>, [FW-1169], <sequence-number>,, INFO, <system-name>,
<Port Name>, <Label>, is below low boundary(High=<High value>,
Low=<Low value>). Current value is <Value> <Unit>.