HP StorageWorks Fabric OS 5.X Diagnostics and System Error Messages Reference Guide (AA-RVHZB-TE, September 2005)

196 Error messages
FW-1164
Message
Probable Cause
Indicates that the number of synchronization losses that the port experiences has changed. Loss of
synchronization errors frequently occur due to a faulty SFP or cable. Signal losses often create
synchronization losses.
Recommended Action
Check both ends of your cable connection. Verify that the cable and SFPs are not faulty.
If you continue to experience synchronization loss errors, troubleshoot your HBA and contact your switch
service provider.
Severity
INFO
FW-1165
Message
Probable Cause
Indicates that the number of synchronization losses that the port experiences has fallen below the low
boundary. Loss of synchronization errors frequently occur due to a faulty SFP or cable. Signal losses often
create synchronization losses.
Recommended Action
No action is required. Respond to this message as is appropriate to the particular policy of the end-user
installation. A low number of synchronization losses means that the switch is functioning normally.
Severity
INFO
FW-1166
Message
Probable Cause
Indicates that the number of synchronization losses that the port experiences has risen above the high
boundary. Loss-of-synchronization errors frequently occur due to a faulty SFP or cable. Signal losses often
create synchronization losses.
<timestamp>, [FW-1164], <sequence-number>,, INFO, <system-name>,
<Port Name>, <Label>, value has changed(High=<High value>, Low=<Low
value>). Current value is <Value> <Unit>.
<timestamp>, [FW-1165], <sequence-number>,, INFO, <system-name>,
<Port Name>, <Label>, is below low boundary(High=<High value>,
Low=<Low value>). Current value is <Value> <Unit>.
<timestamp>, [FW-1166], <sequence-number>,, WARNING, <system-name>,
<Port Name>, <Label>, is above high boundary(High=<High value>,
Low=<Low value>). Current value is <Value> <Unit>.