HP StorageWorks Fabric OS 5.X Diagnostics and System Error Messages Reference Guide (AA-RVHZB-TE, September 2005)

Fabric OS 5.x diagnostics and system error messages reference guide 193
Probable Cause
Indicates that the number of SFP state changes has changed. SFP state changes occur when the SFP is
inserted or removed.
Recommended Action
No action is required. Respond to this message as is appropriate to the particular policy of the end-user
installation.
Severity
INFO
FW-1138
Message
Probable Cause
Indicates that the number of SFP state changes has fallen below the low boundary. SFP state changes
occur when the SFP is inserted or removed.
Recommended Action
No action is required. Respond to this message as is appropriate to the particular policy of the end-user
installation. A low number of SFP state changes means that the switch is functioning normally.
Severity
INFO
FW-1139
Message
Probable Cause
Indicates that the number of SFP state changes has risen above the high boundary. SFP state changes
occur when the SFP is inserted or removed.
Recommended Action
No action is required. Respond to this message as is appropriate to the particular policy of the end-user
installation.
Severity
INFO
<timestamp>, [FW-1138], <sequence-number>,, INFO, <system-name>,
<Label>, is below low boundary(High=<High value>, Low=<Low value>).
Current value is <Value> <Unit>.
<timestamp>, [FW-1139], <sequence-number>,, INFO, <system-name>,
<Label>, is above high boundary(High=<High value>, Low=<Low
value>). Current value is <Value> <Unit>.