HP StorageWorks Fabric OS 5.X Diagnostics and System Error Messages Reference Guide (AA-RVHZB-TE, September 2005)

192 Error messages
Recommended Action
No action is required. Respond to this message as is appropriate to the particular policy of the end-user
installation. A low number of fabric logins means that the fabric is functioning normally.
Severity
INFO
FW-1135
Message
Probable Cause
Indicates that the number of fabric logins has risen above the high boundary. Fabric logins occur when a
port or device initializes with the fabric. The event is called a fabric login or FLOGI.
Recommended Action
No action is required. Respond to this message as is appropriate to the particular policy of the end-user
installation.
Severity
INFO
FW-1136
Message
Probable Cause
Indicates that the number of fabric logins has changed from a value outside of the acceptable range to a
value within the acceptable range. Fabric logins occur when a port or device initializes with the fabric. The
event is called a fabric login or FLOGI.
Recommended Action
No action is required. Respond to this message as is appropriate to the particular policy of the end-user
installation.
Severity
INFO
FW-1137
Message
<timestamp>, [FW-1135], <sequence-number>,, INFO, <system-name>,
<Label>, is above high boundary(High=<High value>, Low=<Low
value>). Current value is <Value> <Unit>.
<timestamp>, [FW-1136], <sequence-number>,, INFO, <system-name>,
<Label>, is between high and low boundaries(High=<High value>,
Low=<Low value>). Current value is <Value> <Unit>.
<timestamp>, [FW-1137], <sequence-number>,, INFO, <system-name>,
<Label>, value has changed(High=<High value>, Low=<Low value>).
Current value is <Value> <Unit>.