HP StorageWorks Fabric OS 5.X Diagnostics and System Error Messages Reference Guide (AA-RVHZB-TE, September 2005)

Fabric OS 5.x diagnostics and system error messages reference guide 191
Severity
INFO
FW-1132
Message
Probable Cause
Indicates that the number of zone changes has changed from a value outside of the acceptable range to a
value within the acceptable range. Zone changes occur when there is a change to the effective zone
configuration.
Recommended Action
No action is required. Respond to this message as is appropriate to the particular policy of the end-user
installation.
Severity
INFO
FW-1133
Message
Probable Cause
Indicates that the number of fabric logins has changed. Fabric logins occur when a port or device
initializes with the fabric. The event is called a fabric login or FLOGI.
Recommended Action
No action is required. Respond to this message as is appropriate to the particular policy of the end-user
installation.
Severity
INFO
FW-1134
Message
Probable Cause
Indicates that the number of fabric logins has fallen below the low boundary. Fabric logins occur when a
port or device initializes with the fabric. The event is called a fabric login or FLOGI.
<timestamp>, [FW-1132], <sequence-number>,, INFO, <system-name>,
<Label>, is between high and low boundaries(High=<High value>,
Low=<Low value>). Current value is <Value> <Unit>.
<timestamp>, [FW-1133], <sequence-number>,, INFO, <system-name>, <Label>, value has
changed(High=<High value>, Low=<Low value>). Current value is <Value> <Unit>.
<timestamp>, [FW-1134], <sequence-number>,, INFO, <system-name>,
<Label>, is below low boundary(High=<High value>, Low=<Low value>).
Current value is <Value> <Unit>.