HP StorageWorks Fabric OS 5.X Diagnostics and System Error Messages Reference Guide (AA-RVHZB-TE, September 2005)

Fabric OS 5.x diagnostics and system error messages reference guide 185
• an E_Port has gone offline.
• a principal link has segmented from the fabric.
Recommended Action
Verify that the cable is properly connected at both ends. Verify that the SFPs have not become faulty. An
inexplicable fabric reconfiguration might be a transient error and might not require troubleshooting.
Severity
INFO
FW-1118
Message
Probable Cause
Indicates that the number of fabric reconfigures has fallen below the low boundary. The following
occurrences can cause a fabric reconfiguration:
• Two switches with the same domain ID have connected to one another.
• Two fabrics have joined.
• An E_Port has gone offline.
• A principal link has segmented from the fabric.
Recommended Action
No action is required. Respond to this message as is appropriate to the particular policy of the end-user
installation. A low number of fabric reconfigurations means that the fabric is functioning normally.
Severity
INFO
FW-1119
Message
Probable Cause
Indicates that the number of fabric reconfigures has risen above the high boundary. The following
occurrences can cause a fabric reconfiguration:
• Two switches with the same domain ID have connected to one another.
• Two fabrics have joined.
• An E_Port has gone offline.
• A principal link has segmented from the fabric.
Recommended Action
Verify that all ISL cables are properly connected at both ends. Verify that the SFP has not become faulty. An
inexplicable fabric reconfiguration might be a transient error and might not require troubleshooting.
<timestamp>, [FW-1118], <sequence-number>,, INFO, <system-name>,
<Label>, is below low boundary(High=<High value>, Low=<Low value>).
Current value is <Value> <Unit>.
<timestamp>, [FW-1119], <sequence-number>,, INFO, <system-name>,
<Label>, is above high boundary(High=<High value>, Low=<Low
value>). Current value is <Value> <Unit>.