HP StorageWorks Fabric OS 5.X Diagnostics and System Error Messages Reference Guide (AA-RVHZB-TE, September 2005)

178 Error messages
Probable Cause
Indicates that the receive power value of the SFP has fallen below the low boundary. The receive
performance area measures the amount of incoming laser to help you determine if the SFP is in good
working condition or not. If the counter often exceeds the threshold, the SFP is deteriorating.
Recommended Action
Verify that your optical components are clean and function properly. Replace deteriorating cables or SFPs.
Check for damage from heat or age.
Severity
WARNING
FW-1039
Message
Probable Cause
Indicates that the receive power value of the SFP has risen above the high boundary. The receive
performance area measures the amount of incoming laser to help you determine if the SFP is in good
working condition or not. If the counter often exceeds the threshold, the SFP is deteriorating.
Recommended Action
Replace the SFP before it deteriorates.
Severity
WARNING
FW-1040
Message
Probable Cause
Indicates that the receive power value of the SFP has changed from a value outside of the acceptable
range to a value within the acceptable range. The receive performance area measures the amount of
incoming laser to help you determine if the SFP is in good working condition or not. If the counter often
exceeds the threshold, the SFP is deteriorating.
Recommended Action
No action is required. Respond to this message as is appropriate to the particular policy of the end-user
installation.
Severity
INFO
<timestamp>, [FW-1039], <sequence-number>,, WARNING, <system-name>,
<Label>, is above high boundary(High=<High value>, Low=<Low
value>). Current value is <Value> <Unit>.
<timestamp>, [FW-1040], <sequence-number>,, INFO, <system-name>,
<Label>, is between high and low boundaries(High=<High value>,
Low=<Low value>). Current value is <Value> <Unit>.