HP StorageWorks Fabric OS 5.X Diagnostics and System Error Messages Reference Guide (AA-RVHZB-TE, September 2005)

Fabric OS 5.x diagnostics and system error messages reference guide 177
Recommended Action
Frequent fluctuations in temperature might indicate a deteriorating SFP. Replace the SFP.
Severity
WARNING
FW-1036
Message
Probable Cause
Indicates that the temperature of the SFP has changed from a value outside of the acceptable range to a
value within the acceptable range.
Recommended Action
No action is required.
Frequent fluctuations in temperature might indicate a deteriorating SFP.
Severity
INFO
FW-1037
Message
Probable Cause
Indicates that the receive power value of the SFP has changed. The receive performance area measures the
amount of incoming laser to help you determine if the SFP is in good working condition or not. If the
counter often exceeds the threshold, the SFP is deteriorating.
Recommended Action
Incoming laser fluctuations usually indicate a deteriorating SFP. If this message occurs repeatedly, replace
the SFP.
Severity
INFO
FW-1038
Message
<timestamp>, [FW-1036], <sequence-number>,, INFO, <system-name>,
<Label>, is between high and low boundaries(High=<High value>,
Low=<Low value>). Current value is <Value> <Unit>.
<timestamp>, [FW-1037], <sequence-number>,, INFO, <system-name>,
<Label>, value has changed(High=<High value>, Low=<Low value>).
Current value is <Value> <Unit>.
<timestamp>, [FW-1038], <sequence-number>,, WARNING, <system-name>,
<Label>, is below low boundary(High=<High value>, Low=<Low value>).
Current value is <Value> <Unit>.