HP StorageWorks Fabric OS 5.X Diagnostics and System Error Messages Reference Guide (AA-RVHZB-TE, September 2005)

176 Error messages
Recommended Action
No action is required. Respond to this message as is appropriate to the particular policy of the end-user
installation.
Severity
INFO
FW-1033
Message
Probable Cause
Indicates that the temperature of the SFP has changed.
Recommended Action
No action is required. Respond to this message as is appropriate to the particular policy of the end-user
installation. Frequent fluctuations in SFP temperature might indicate a deteriorating SFP.
Severity
INFO
FW-1034
Message
Probable Cause
Indicates that the temperature of the SFP has fallen below the low boundary.
Recommended Action
No action is required. Respond to this message as is appropriate to the particular policy of the end-user
installation.
Severity
WARNING
FW-1035
Message
Probable Cause
Indicates that the temperature of the SFP has risen above the high boundary.
<timestamp>, [FW-1033], <sequence-number>,, INFO, <system-name>,
<Label>, value has changed(High=<High value>, Low=<Low value>).
Current value is <Value> <Unit>.
<timestamp>, [FW-1034], <sequence-number>,, WARNING, <system-name>,
<Label>, is below low boundary(High=<High value>, Low=<Low value>).
Current value is <Value> <Unit>.
<timestamp>, [FW-1035], <sequence-number>,, WARNING, <system-name>,
<Label>, is above high boundary(High=<High value>, Low=<Low
value>). Current value is <Value> <Unit>.