HP StorageWorks Fabric OS 5.X Diagnostics and System Error Messages Reference Guide (AA-RVHZB-TE, September 2005)

170 Error messages
FSS-1005
Message
Probable Cause
Indicates that the read system call to the FSS device failed.
Recommended Action
If the message persists, run supportFtp and traceFtp -e (as needed) to set up automatic FTP transfers;
then run the supportSave command and contact your switch service provider.
Severity
WARNING
FSS-1006
Message
Probable Cause
Indicates that data is not available on the FSS device.
Recommended Action
If the message persists, run supportFtp and traceFtp -e (as needed) to set up automatic FTP transfers;
then run the supportSave command and contact your switch service provider.
Severity
WARNING
FSSM errors
FSSM-1002
Message
Probable Cause
Indicates that the HA state for the active CP is in synchronization with the HA state of the standby CP. If the
standby CP is healthy, then a failover is nondisruptive. For more information on the haFailover
command, refer to the
HP StorageWorks Fabric OS 5.x command reference guide .
Recommended Action
No action is required.
Severity
INFO
<timestamp>, [FSS-1005], <sequence-number>,, WARNING,
<system-name>, FSS read failure
<timestamp>, [FSS-1006], <sequence-number>,, WARNING,
<system-name>, No message available
<timestamp>, [FSSM-1002], <sequence-number>,, INFO, <system-name>,
HA State is in sync