HP StorageWorks Fabric OS 5.X Diagnostics and System Error Messages Reference Guide (AA-RVHZB-TE, September 2005)

Fabric OS 5.x diagnostics and system error messages reference guide 167
Severity
ERROR
FSPF-1002
Message
Probable Cause
Indicates that the switch received the wrong domain ID from a neighbor (adjacent) switch in the HELLO
message from a specified port. This might happen when a domain ID for a switch has been changed.
Recommended Action
No action is required.
Severity
INFO
FSPF-1003
Message
Probable Cause
Indicates that the specified remote domain ID is out of range. The valid range is 1 through 239, except
when interopMode is enabled, in which case the valid range is 97 to 127.
Recommended Action
No action is required. The frame is discarded.
Severity
ERROR
FSPF-1005
Message
Probable Cause
Indicates that an incorrect section ID was reported from the specified input port. The section ID is used to
identify a set of switches that share an identical topology database. The section ID is implemented inside
the protocol. The error message itself will indicate the mismatched section ID. It should be set to 0 for a
nonhierarchical fabric. switches support only section ID 0.
<timestamp>, [FSPF-1002], <sequence-number>,, INFO, <system-name>,
Wrong neighbor ID (<domain ID>) in Hello message from port <port
number>, expected ID = <domain ID>
<timestamp>, [FSPF-1003], <sequence-number>,, ERROR, <system-name>,
Remote Domain ID <domain number> out of range, input port = <port
number>
<timestamp>, [FSPF-1005], <sequence-number>,, ERROR, <system-name>,
Wrong Section Id <section number>, should be <section number>,
input port = <port number>