HP StorageWorks Fabric OS 5.X Diagnostics and System Error Messages Reference Guide (AA-RVHZB-TE, September 2005)

Fabric OS 5.x diagnostics and system error messages reference guide 165
Recommended Action
Use the portDisable command to disable the specified port causing the address conflict.
Severity
WARNING
FLOD error messages
FLOD-1001
Message
Probable Cause
Indicates that the link state record (LSR) type is unknown. The following two LSR header types are the only
known types: 1 - Unicast and 3 - Multicast.
Recommended Action
No action is required. The record is discarded.
Severity
WARNING
FLOD-1003
Message
Probable Cause
Indicates that the acceptable link count received was exceeded in the link state record (LSR).
Recommended Action
No action is required. The record is discarded.
Severity
WARNING
FLOD-1004
Message
Probable Cause
Indicates that the LSU size exceeds what the system can support.
<timestamp>, [FLOD-1001], <sequence-number>,, WARNING,
<system-name>, Unknown LSR type: port <port number>, type <LSR
header type>
<timestamp>, [FLOD-1003], <sequence-number>,, WARNING,
<system-name>, Link count exceeded in received LSR, value = <link
count number>
<timestamp>, [FLOD-1004], <sequence-number>,, ERROR, <system-name>,
Excessive LSU length = <LSU length>