HP StorageWorks Fabric OS 5.X Diagnostics and System Error Messages Reference Guide (AA-RVHZB-TE, September 2005)

158 Error messages
FICU error messages
FICU-1001
Message
Probable Cause
Indicates that one of the configuration management functions failed. The key variable is part of the Fabric
OS configuration database and is for support use only. The error variable is an internal error number.
Recommended Action
Execute an haFailover on the switch if it has redundant CPs or reboot the switch. Run the saveCore
command to check if your flash is full. If the flash is full, run the saveCore command to clear the core
files. Refer to the
HP StorageWorks Fabric OS 5.x command reference guide for more information on these
commands.
Severity
ERROR
FICU-1002
Message
Probable Cause
Indicates that the FICON-CUP daemon failed to get switch RNID from the management server due to a
Fabric OS problem. The domain variable displays the domain ID of the target switch for this RNID. The
error variable is an internal error number.
Recommended Action
If this is a bladed switch, execute the haFailover command. If the problem persists, or if this is a
nonbladed switch, download a new firmware version using the firmwareDownload command. Refer
to the
HP StorageWorks Fabric OS 5.x command reference guide for more information on this command.
Severity
ERROR
FICU-1003
Message
Probable Cause
Indicates that the FICON-CUP license is not installed on the switch.
<timestamp>, [FICU-1001], <sequence-number>,, ERROR, <system-name>,
<function name>: config<config Set(key)|Get(key)| Save> failed rc =
<error>
<timestamp>, [FICU-1002], <sequence-number>,, ERROR, <system-name>,
Failed to get RNID from Management Server Domain=<domain>
rc=<error>
<timestamp>, [FICU-1003], <sequence-number>,, WARNING,
<system-name>, <function name>: <message> FICON-CUP License Not
Installed (<error>)