HP StorageWorks Fabric OS 5.X Diagnostics and System Error Messages Reference Guide (AA-RVHZB-TE, September 2005)

Fabric OS 5.x diagnostics and system error messages reference guide 153
FABS-1008
Message
Probable Cause
Indicates that the Fabric OS was unable to locate a necessary object handle. This is usually an internal
Fabric OS problem or file corruption.
Recommended Action
Reboot or power cycle the switch.
Severity
WARNING
FABS-1009
Message
Probable Cause
Indicates that the Fabric OS was unable to locate an appropriate object handle. This is usually an internal
Fabric OS problem or file corruption.
Recommended Action
Reboot or power cycle the switch.
Severity
WARNING
FABS-1010
Message
Probable Cause
Indicates that the Fabric OS detected an unknown event type. This is usually an internal Fabric OS problem
or file corruption.
Recommended Action
Reboot or power cycle the switch.
If the message persists, run the firmwareDownload command to update the firmware.
Severity
WARNING
<timestamp>, [FABS-1008], <sequence-number>,, WARNING,
<system-name>, <Function name>: Media oid mapping failed
<timestamp>, [FABS-1009], <sequence-number>,, WARNING,
<system-name>, <Function name>: type is not media
<timestamp>, [FABS-1010], <sequence-number>,, WARNING,
<system-name>, <Function name>: Wrong media_event <Event number>