HP StorageWorks Fabric OS 5.X Diagnostics and System Error Messages Reference Guide (AA-RVHZB-TE, September 2005)

Fabric OS 5.x diagnostics and system error messages reference guide 151
Probable Cause
Indicates that an internal problem has been detected by the software. This is usually an internal Fabric OS
problem or file corruption.
Recommended Action
Reboot or power cycle the switch.
If the message persists, run the firmwareDownload command to update the firmware.
Severity
WARNING
FABS-1004
Message
Probable Cause
Indicates that an operation has been interrupted by a signal. This is usually an internal Fabric OS problem
or file corruption.
Recommended Action
Reboot or power cycle the switch.
Severity
WARNING
FABS-1005
Message
Probable Cause
Indicates that an unsupported operation has been requested. This is usually an internal Fabric OS problem
or file corruption. The possible values for function name and description of problem are:
fabsys_write: Unsupported write operation: process xxx
where xxx is the process ID (PID), which could be any whole number.
Recommended Action
Reboot or power cycle the active CP (for modular systems) or the switch (for single-board systems).
If the message persists, run the firmwareDownload command to update the firmware.
Severity
WARNING
<timestamp>, [FABS-1004], <sequence-number>,, WARNING,
<system-name>, <Function name and description of problem> process
<Process ID number> (<Current command name>) <Pending signal
number>
<timestamp>, [FABS-1005], <sequence-number>,, WARNING,
<system-name>, <Function name and description of problem> (<ID
type>= <ID number>)