HP StorageWorks Fabric OS 5.X Diagnostics and System Error Messages Reference Guide (AA-RVHZB-TE, September 2005)

150 Error messages
• R_RDY mode: Receiver-ready flow control mode. This is the Fibre Channel standard protocol, that uses
R_RDY primitive for flow control.
• DUAL_CR mode: Dual-credit flow control mode. In both of the previous modes, the buffer credits are
fixed, based on the port configuration information. In this mode, the buffer credits are negotiated as
part of ELP exchange. This mode also uses the R_RDY primitive for flow control.
Recommended Action
No action is required.
Severity
INFO
FABR-1030
Message
Probable Cause
Indicates that the domain ID for a switch has been changed.
Recommended Action
No action is required.
Severity
INFO
FABS-1001
Message
Probable Cause
Indicates that the system is low on memory and cannot allocate more memory for new operations. This is
usually an internal Fabric OS problem or file corruption. Description of memory need indicates how much
memory was being requested. The value could be any whole number.
Recommended Action
Reboot or power cycle the switch.
Severity
CRITICAL
FABS-1002
Message
<timestamp>, [FABR-1030], <sequence-number>,, INFO, <system-name>,
fabric: Domain <new domain ID> (was <old domain ID>)
<timestamp>, [FABS-1001], <sequence-number>,, CRITICAL,
<system-name>, <Function name> <Description of memory need>
<timestamp>, [FABS-1002], <sequence-number>,, WARNING,
<system-name>, <Function name> <Description of problem>