HP StorageWorks Fabric OS 5.X Diagnostics and System Error Messages Reference Guide (AA-RVHZB-TE, September 2005)

144 Error messages
FABR-1010
Message
Probable Cause
Indicates that the errors occurred while cleaning up the RDI (request domain ID). The error description
provides further details. This message is rare and usually indicates a problem with the Fabric OS.
Recommended Action
If the message persists, run supportFtp (as needed) to set up automatic FTP transfers; then run the
supportSave command and contact your switch service provider.
Severity
WARNING
FABR-1011
Message
Probable Cause
Indicates that the Fabric OS is unable to inform the FSSME (Fabric OS State Synchronization Management
module) that the fabric is stable or unstable. This message is rare and usually indicates a problem with the
Fabric OS.
Recommended Action
If the message persists, run supportFtp (as needed) to set up automatic FTP transfers; then run the
supportSave command and contact your switch service provider.
Severity
ERROR
FABR-1012
Message
Probable Cause
Indicates that the fabric is not in the appropriate state for the specified process. This message is rare and
usually indicates a problem with the Fabric OS.
Recommended Action
The fabric daemon will take proper action to recover from the error.
If the message persists, run supportFtp (as needed) to set up automatic FTP transfers; then run the
supportSave command and contact your switch service provider.
<timestamp>, [FABR-1010], <sequence-number>,, WARNING,
<system-name>, <error description>
<timestamp>, [FABR-1011], <sequence-number>,, ERROR, <system-name>,
<error description>
<timestamp>, [FABR-1012], <sequence-number>,, WARNING,
<system-name>, <function stream>: no such type, <invalid type>