HP StorageWorks Fabric OS 5.X Diagnostics and System Error Messages Reference Guide (AA-RVHZB-TE, September 2005)

142 Error messages
FABR-1005
Message
Probable Cause
Indicates that the application failed to send an async command for the specified port. The message
provides additional details regarding the reason for the failure and the exchange ID of the command. This
can happen if a port is about to go down.
Recommended Action
This message is often transitory. No action is required.
If the message persists, run supportFtp (as needed) to set up automatic FTP transfers; then run the
supportSave command and contact your switch service provider.
Severity
WARNING
FABR-1006
Message
Probable Cause
Indicates that the Fabric OS is trying to free or deallocate memory space that has already been
deallocated. This message is rare and usually indicates a problem with the Fabric OS.
Recommended Action
In case of severe memory corruption, the system might recover by performing an automatic failover.
If the message persists, run supportFtp (as needed) to set up automatic FTP transfers; then run the
supportSave command and contact your switch service provider.
Severity
WARNING
FABR-1007
Message
Probable Cause
Indicates that a failure occurred when deallocating an information unit. This message is rare and usually
indicates a problem with the Fabric OS.
<timestamp>, [FABR-1005], <sequence-number>,, WARNING,
<system-name>, <command sent>: port <port number>: status 0x<reason
for failure> (<description of failure reason>) xid = 0x<exchange ID
of command>
<timestamp>, [FABR-1006], <sequence-number>,, WARNING,
<system-name>, Node free error, caller: <error description>
<timestamp>, [FABR-1007], <sequence-number>,, WARNING,
<system-name>, IU free error, caller: <function attempting to
de-allocate IU>