HP StorageWorks Fabric OS 5.X Diagnostics and System Error Messages Reference Guide (AA-RVHZB-TE, September 2005)

140 Error messages
• The API host computer is shut down.
• There has been a network problem.
• The Ethernet cable is not properly connected to the switch.
• A user has unplugged the Ethernet cable and then plugged it back in.
Recommended Action
This problem can be transient; try to reestablish the connection.
If the cause is a network or Ethernet cable problem, you must fix the problem before you can reestablish an
API session. Verify that your workstation has a TCP connection to the switch.
The Fabric OS automatically kills unused sessions to prevent resource leaking.
Severity
WARNING
FABS error messages
FABR-1001
Message
Probable Cause
Indicates that the specified switch port is isolated because of a segmentation due to mismatched
configuration parameters.
Recommended Action
Based on the segmentation reason displayed with the message, look for a possible mismatch of relevant
configuration parameters in the switches at both ends of the link.
Run the configure command to modify the appropriate switch parameters on both the local and remote
switch.
Severity
WARNING
FABR-1002
Message
Probable Cause
Indicates that the fabric does not have any available multicast alias IDs to assign to the alias server.
Recommended Action
Verify alias IDs using the fabricShow command on the principal switch.
Severity
WARNING
<timestamp>, [FABR-1001], <sequence-number>,, WARNING,
<system-name>, port <port number>, <segmentation reason>
<timestamp>, [FABR-1002], <sequence-number>,, WARNING,
<system-name>, fabGaid: no free multicast alias IDs