HP StorageWorks Fabric OS 5.X Diagnostics and System Error Messages Reference Guide (AA-RVHZB-TE, September 2005)

Fabric OS 5.x diagnostics and system error messages reference guide 125
Probable Cause
Indicates that a problem was discovered when performing consistency checks during a warm boot.
Recommended Action
A reboot or power cycle is required to clear the situation.
Severity
WARNING
EM-1016
Message
Probable Cause
Indicates that consistency checks during a cold boot discovered a problem.
Recommended Action
Monitor the switch.
If the message persists, run supportFtp (as needed) to set up automatic FTP transfers; then run the
supportSave command and contact your switch service provider.
Severity
WARNING
EM-1017
Message
Probable Cause
Indicates that a user did not commit a changed WWN value prior executing a reboot, power cycle, or
firmwareDownload operation.
Recommended Action
Change and commit the new WWN value.
Severity
WARNING
EM-1018
Message
<timestamp>, [EM-1016], <sequence-number>,, WARNING, <system-name>,
Cold recovery failed (<Return code>)
<timestamp>, [EM-1017], <sequence-number>,, WARNING, <system-name>,
Uncommitted WWN change detected. Cold reboot required.
<timestamp>, [EM-1018], <sequence-number>,, CRITICAL,
<system-name>, CP blade in slot <Slot number> failed to retrieve
current chassis type <Detailed fault descriptor>