HP StorageWorks Fabric OS 5.X Diagnostics and System Error Messages Reference Guide (AA-RVHZB-TE, September 2005)

Fabric OS 5.x diagnostics and system error messages reference guide 107
Severity
ERROR
AUTH-1038
Message
Probable Cause
Indicates that the PKI certificate is not installed properly.
Recommended Action
Reinstall the PKI certificate, using the pkiCreate command.
Reinitialize authentication using the portDisable and portEnable commands or the switchDisable
and switchEnable commands.
If the message persists, run supportFtp (as needed) to set up automatic FTP transfers; then run the
supportSave command and contact your switch service provider.
Severity
ERROR
BL error messaages
BL-1000
Message
Probable Cause
Indicates that the switch has started initializing the ports. This message occurs only on the SAN Switch
4/32.
Recommended Action
No action is required.
Severity
INFO
BL-1001
Message
<timestamp>, [AUTH-1038], <sequence-number>,, ERROR, <system-name>,
Failed to retrieve certificate during <authentication phase>: port
<port number>
<timestamp>, [BL-1000], <sequence-number>,, INFO, <system-name>,
Initializing Ports...
<timestamp>, [BL-1001], <sequence-number>,, INFO, <system-name>,
Port Initialization Completed