HP StorageWorks Fabric OS 5.X Command Reference Guide (AA-RVHVB-TE, September 2005)

784 MUA-based roles
qloopAdd
Adds a member to a QuickLoop.
qloopCreate
Creates a QuickLoop.
qloopDelete
Deletes a QuickLoop.
qloopRemove
Removes a member from a QuickLoop.
qloopShow
Displays QuickLoop information.
quietMode
Sets or clears the telnet session quiet mode, or displays the current
mode.
reboot
Reboots either one control processor (CP) or the entire system.
routeHelp
Displays a list of FSPF-related commands.
saveCore
Saves or removes core files created by daemons.
secHelp
Displays information about security commands.
sensorShow
Displays sensor readings.
setDbg
Sets debug level of the specified module.
setEsdMode
Enables or disables ESD mode.
setGbicMode
Enables or disables media mode.
setMediaMode
Enables or disables media mode.
setModem
Enables or disables modem dial-in to a control processor (CP).
setSfpMode
Enables or disables media mode.
setVerbose
Specifies module verbose level.
sfpShow
Displays serial ID SFP information.
shellFlowControlDisable
Disables XON/XOFF flow control on the console serial ports.
shellFlowControlEnable
Enables XON/XOFF flow control on the console serial ports.
slotOn
Enables a blade slot.
slotPowerOff
Removes power from a slot.
slotPowerOn
Restores power to a slot.
slotShow
Displays the status of all slots in the system.
snmpConfig
Manages the SNMP agent configuration.
snmpMibCapSet
Modifies options for configuring SNMP MIB trap capability.
Table 28 switchAdmin commands (continued)
Command Description