HP StorageWorks Fabric OS 5.X Command Reference Guide (AA-RVHVB-TE, September 2005)

Fabric OS 5.x command reference guide 779
fabricPrincipal
Sets principal switch selection mode.
fabricShow
Displays fabric membership information.
fabStateClear
Clears the fabric state information.
fabStateResize
Changes the number of state entries.
fabStateShow
Displays the fabric state information.
fabStatsShow
Displays the fabric statistics.
fabSwitchShow
Displays the fabric switch state structure information.
fanShow
Displays fan status and speed.
fastBoot
Reboots the control processor (CP), bypassing power-on self-test (POST).
fcPing
Sends a Fibre Channel Extended Link Service (ELS) ECHO request to a
pair of ports.
fcpLogClear
Clears the FCPD debug information log (debug command).
fcpLogDisable
Disables the FCPD debug information log (debug command).
fcpLogEnable
Enables the FCPD debug information log (debug command).
fcpLogShow
Displays the FCPD debug information log (debug command).
fcpProbeShow
Displays the Fibre Channel Protocol (FCP) probe information.
fcpRlsShow
Display the Fibre Channel Protocol (FCP) Read Link Status (RLS)
information.
fdmiCacheShow
Displays abbreviated remote FDMI device information, according to
remote domain ID.
fdmiShow
Displays detailed FDMI device information.
ficonClear
Clears the records from the specified FICON database.
ficoncupset
Sets FICON-CUP parameters for a switch.
ficoncupshow
Displays FICON-CUP parameters for a switch.
ficonShow
Displays the contents of the specified FICON database.
firmwareCommit
Commits switch firmware.
firmwareDownload
Downloads switch firmware from a remote host or local directory.
firmwareDownloadStatus
Displays the status of a firmware download.
firmwareRestore
Restores the former active firmware image.
Table 28 switchAdmin commands (continued)
Command Description