HP StorageWorks Fabric OS 5.X Command Reference Guide (AA-RVHVB-TE, September 2005)

778 MUA-based roles
chassisShow
Displays all field replaceable units (FRUs).
chipRegShow
Displays the port registers for a given chip number.
cmemRetentionTest
Tests the data retention of the central memory SRAMs.
cmiTest
Verifies the control message interface (CMI) bus between ASICs.
configShow
Displays system configuration settings.
configDownload
Downloads a switch configuration file from a host file, omitting zoning
and security configurations.
configUpload
Uploads the switch configuration file to a host file.
configure
Modifies system configuration parameters.
dataTypeShow
Displays sample data stream types used in some diagnostic commands.
date
Displays or sets the switch date and time.
dbgShow
Displays current values of debug and verbosity levels of the specified
module.
diagHelp
Displays diagnostic command information.
dlsReset
Disables the dynamic load sharing (DLS) option.
dlsSet
Enables the dynamic load sharing (DLS) option.
dlsShow
Display the setting of the dynamic load sharing (DLS) option.
dnsConfig
Sets or displays domain name service (DNS) parameters.
enclosureShow
Displays attributes of the switch enclosure.
errClear
Clears all error log messages for all switch instances on this control
processor (CP).
errDelimiterSet
Sets the error log start and end delimiter for messages sent to the
console and syslog.
errDump
Displays the error log, without pagination.
errModuleShow
Displays all the defined error log modules.
errShow
Displays the error log messages, with pagination.
exit
Logs out from a shell session.
fabPortShow
Displays fabric port information.
fabRetryShow
Displays the retry count of the fabric commands.
fabricLog
Displays or manipulates the fabric log.
Table 28 switchAdmin commands (continued)
Command Description