HP StorageWorks Fabric OS 5.X Command Reference Guide (AA-RVHVB-TE, September 2005)

Fabric OS 5.x command reference guide 775
secVersionReset Must be run from the primary FCS switch. Can also be run on a single
non-FCS switch which is segmented from a fabric.
tsClockServer Can be run on all switches to view the NTP server's IP address. You can only
modify the NTP server's IP address on the primary FCS switch.
wwn This command can be run on all switches to view the WWN. With security
enabled the WWN of a switch cannot be modified.
zoneAdd Must be run from the primary FCS switch.
zoneCreate Must be run from the primary FCS switch.
zoneDelete Must be run from the primary FCS switch.
zoneRemove Must be run from the primary FCS switch.
zoneShow Must be run from the primary FCS switch.
Table 27 Commands exclusive to the primary FCS (continued)
Command Notes