HP StorageWorks Fabric OS 5.X Command Reference Guide (AA-RVHVB-TE, September 2005)

770 Licensed product commands
Advanced Performance Monitoring commands
The commands listed in Table 25 are available with the purchase of an HP Advanced Performance
Monitoring license key.
Table 25 Performance monitoring commands
Command Description
perfAddEEMonitor Add an end-to-end monitor to a port.
perfAddIPMonitor Add an IP monitor to a port.
perfAddReadMonitor Add a SCSI Read monitor to a port.
perfAddRWMonitor Add a SCSI Read and Write monitor to a port.
perfAddSCSIMonitor Add a SCSI traffic frame monitor to a port.
perfAddUserMonitor Add a user-defined monitor to a port.
perfAddWriteMonitor Add a SCSI Write monitor to a port.
perfCfgClear Clear the performance monitoring settings from flash memory.
perfCfgRestore Restore performance monitoring settings from flash memory.
perfCfgSave Save the current performance monitoring settings to flash memory.
perfClearEEMonitor Clear statistics counters of an end-to-end (EE) monitor on a port.
perfClearFilterMonitor Clear statistics counters of a filter-based monitor.
perfClrAlpaCrc Clear an AL_PA device CRC count by the port and AL_PA.
perfDelEEMonitor Delete an end-to-end monitor on port.
perfDelFilterMonitor Delete a filter-based monitor.
perfSetPortEEMask Set overall mask for end-to-end (EE) monitors.
perfShowAlpaCrc Display the AL_PA CRC count by port or by AL_PA.
perfShowEEMonitor Display user-defined end-to-end monitors on a port.
perfShowFilterMonitor Display filter-based monitors for a port.
perfShowPortEEMask Display the current end-to-end mask of a port.