HP StorageWorks Fabric OS 5.X Command Reference Guide (AA-RVHVB-TE, September 2005)

758 Fabric OS commands
Expunges a zone object.
Synopsis
zoneObjectExpunge “objectName“
Availability
admin
NOTE: This command requires HP Advanced Zoning license, which is included within the Base
Configuration Services and bundled with each B-series switch.
Description
Use this command to expunge a zone object. In addition, to performing a simple delete, this command
also removes the object from the member lists of all other objects. Afterwards, this object is completely
removed from the database. You can use this command for all zone object types, including cfg, zone,
and alias.
This command changes the defined configuration. For the change to be preserved across switch reboots,
it must be saved to flash memory using the cfgSave command. For the change to become effective, an
appropriate zone configuration must be enabled using the cfgEnable command.
NOTE: When security mode is enabled, this command can be issued only from the primary FCS switch.
Operands
This command has the following operand:
zoneObjectExpunge
objectName The name of the object that you want to expunge. This operand is required.