HP StorageWorks Fabric OS 5.X Command Reference Guide (AA-RVHVB-TE, September 2005)

Fabric OS 5.x command reference guide 735
Examples
To run the txdPath test:
Diagnostics
When it detects failures, the test can report one or more of the following error messages:
DATA
ERRSTAT
INIT
PORTDIED
STATS
TIMEOUT
XMIT
See the HP StorageWorks Fabric OS 5.x diagnostics and system error messages reference guide for
more information.
See also
backport
camTest
centralMemoryTest
cmemRetentionTest
cmiTest
crossPortTest
itemList
portLoopbackTest
portRegTest
spinSilk
sramRetentionTest
--nonstop mode Specify nonstop mode. If set to a nonzero value, the test does not stop on the
first error. The default value is 0.
-ports
itemlist
Specify a list of user ports to test. By default, all of the user ports in the current
switch are tested. This option might be used to restrict testing to the specified
ports.
switch:admin> txdpath
Running TX Data Path Test ....
Test Complete: "txdpath" Pass 10 of 10
Duration 0 hr, 0 min & 47 sec (0:0:47:645).