HP StorageWorks Fabric OS 5.X Command Reference Guide (AA-RVHVB-TE, September 2005)

716 Fabric OS commands
Displays, enables, or disables the trace auto-FTP, or retrieves the trace dump file.
Synopsis
traceftp [-S]
traceftp -e
traceftp -d
traceftp -n [-s slot] [-h hostip] [-u username] [-p password]
[-d remotedirectory] [-f remotefile]
Availability
admin
Description
Use this command to display, enable, or disable trace auto-FTP or to retrieve a trace dump file from the
switch to the FTP site immediately.
NOTE: If there is no parameter specified, this command defaults to traceFtp -S. Default remote file
name format for traceFtp -n is switchname-S#-YYYYMMDDHHMMSS.dmp, where # is the slot
number (0 if it is on nonbladed system), and YYYYMMDDHHMMSS is trace dump time
(year-month-day-hour-minute-second).
Operands
This command has the following mutually exclusive operands:
traceFtp
-S Displays the trace auto-FTP feature.
-e Enables the trace auto-FTP feature.
-d Disables the trace auto-FTP feature.
-n Retrieves a trace dump file from the switch immediately. The -n option has the following
optional operands: