HP StorageWorks Fabric OS 5.X Command Reference Guide (AA-RVHVB-TE, September 2005)

690 Fabric OS commands
Halts and reboots the operational switch.
Synopsis
switchreboot
Availability
admin
Description
This command reboots the operational switch without disrupting the other switch in a dual-switch chassis.
This command is equal to running switchShutdown and switchStart.
NOTE: This command is not supported on single-domain systems.
Operands
none
Examples
To reboot an operational switch:
See also
switchShutdown
switchStart
switchReboot
switch:admin> switchreboot
Stopping all switch daemons...Done.
Powering off slot 1...Done.
Powering off slot 4...Done.
Checking all slots are powered off...Done.
Cleaning up kernel modules...Done.
Initializing kernel modules...Done.
Starting all switch daemons...Done.
Powering on slot 1...Done.
Powering on slot 4...Done.
Checking diagnostics...Done.
setup FCIP IP: ifconfig fc0 ip=0.0.0.0, netmask=255.255.255.0