HP StorageWorks Fabric OS 5.X Command Reference Guide (AA-RVHVB-TE, September 2005)

Fabric OS 5.x command reference guide 677
Example
To display switch information for debugging:
lines Specifies the number of lines of portLogDump output to
display. If this parameter used, the
slotnumber/portnumber parameter is required.
switch:admin> supportshow 1/1-3
supportshow groups enabled: system
version:
Kernel: 2.4.19
Fabric OS: v4.1.0
Made on: Fri Jan 10 01:06:10 2003
Flash: Thu Jan 17 00:06:52 2003
BootProm: 3.2.1
uptime:
10:49am up 3:25, 1 user, load average: 1.55, 1.20, 1.11
switchshow:
switchName: Ulysses2
switchType: 10.1
switchState: Online
switchMode: Native
switchRole: Principal
switchDomain: 1
switchId: fffc01
switchWwn: 10:00:00:60:69:80:03:0c
zoning: OFF
switchBeacon: OFF
blade1 Beacon: OFF
blade2 Beacon: OFF
blade4 Beacon: OFF
Area Slot Port Media Speed State
=====================================
0 1 0 id N2 Online Loopback->Slot 1 Port 0
1 1 1 id N2 Online Loopback->Slot 1 Port 1
2 1 2 id N2 Online Loopback->Slot 1 Port 2
3 1 3 id N2 Online Loopback->Slot 1 Port 3
4 1 4 id N2 Online Loopback->Slot 1 Port 4
5 1 5 id N2 Online Loopback->Slot 1 Port 5
6 1 6 id N2 Online Loopback->Slot 1 Port 6
(output truncated)