HP StorageWorks Fabric OS 5.X Command Reference Guide (AA-RVHVB-TE, September 2005)

Fabric OS 5.x command reference guide 669
Sets, clears, or displays support FTP parameters, or a time interval to check the FTP server.
Synopsis
supportftp [-S]
supportftp -s [-h hostip] [-u username] [-p password] [-d remotedirectory]
supportftp -t hours
supportftp -R
Availability
admin
Description
Use this command to set, clear, or display support FTP parameters or a time interval to check the FTP
server.
NOTE: If there is no parameter specified, this command defaults to supportFtp -S.
Operands
This command has the following mutually exclusive operands:
supportFtp
--S Displays FTP parameters.
--s Sets the FTP parameters. -s has the following optional operands:
h hostip
-u username
-p password
-d remotedirectory
Specifies the FTP host IP address. It must be an IP
address. hostip should be less than 48
characters.
Specifies the FTP user name. username should be
less than 48 characters.
Specifies the FTP user password. If the user name is
anonymous, the password is not needed.
password should be less than 48 characters.
Specifies the remote directory in which to store
trace dump files. supportFtp cannot take a slash
( / ) as a directory name. remotedirectory
should be less than 48 characters.
--t Sets the time interval at which to check the FTP server. -t has the following
required operands:
hours Checks the connectivity of the FTP server at the
indicated time interval (in hours).
-R Clears FTP parameters.