HP StorageWorks Fabric OS 5.X Command Reference Guide (AA-RVHVB-TE, September 2005)

Fabric OS 5.x command reference guide 647
Modifies options for configuring SNMP MIB trap capability.
Synopsis
snmpmibcapset
Availability
admin
Description
This command enables a user to turn on or off certain MIBs and traps. This command also enables a user
to turn on or off group information and SSN in SW trap messages. It first displays current settings and
then prompts the user to change the values for each parameter.
Operands
none
snmpMibCapSet
FA-MIB Specifying yes means the user can access FA-MIB variables with an SNMP
manager. The default value is yes.
HA-MIB Specifying yes means the user can access Entity-MIB and HA-MIB variables with an
SNMP manager. The default value is yes.
SW-TRAP Specifying yes means the SNMP management application can receive SW-TRAPS
from the switch. The default value is yes.
FA-TRAP Specifying yes means the SNMP management application can receive FA-TRAPS
from the switch. The default value is yes.
SW-EXTTRAP Specifying yes means the SNMP management application can receive
SW-EXTTRAPS from the switch. The default value is yes.
HA-TRAP Specifying yes means the SNMP management application can receive HA-TRAPS
from the switch. The default value is yes.