HP StorageWorks Fabric OS 5.X Command Reference Guide (AA-RVHVB-TE, September 2005)

560 Fabric OS commands
Operands
The operands are as follows:
import [-config cacert] | [-config swcert [-enable https]]
Import a certificate on to the switch. Use this for the following:
• Download a certificate issued by a CA after sending the CSR to the CA.
• Download an Issuing CA certificate.
• Set imported certificate with -config option. Specifying cacert sets the CA certificate file name in
configuration and specifying swcert sets switch certificate file name in configuration.
• Enable secure protocols with -enable option. This option can be used only with -config swcert.
Examples
To generate a public/private key pair:
genkey Generates a public/private key pair.This is the first step for setting up
third-party certificates. The key length can be either 1,024 or 2,048 bits long.
The greater the length of the key, the more secure is the connection; however,
the performance goes down. The keys are generated only after deleting
existing CSR and all other certificates.
gencsr Generates a new CSR for the switch. This is second step for setting up
third-party certificates in the switch. To generate a CSR, the admin must
answer a series of questions prompted by this option. Once all questions are
answered, a CSR is generated and placed in a file named
ip_address.csr. The ip_address is the IP address of the switch.
delcsr Deletes the CSR in the switch.
showcsr Displays the contents of the CSR in the switch.
show Displays a list of all certificates in the switch.
show certificate_name Displays the contents of the specified certificate.
delete certificate_name Deletes the specified certificate.
export Exports a CSR to a host. This is typically used to submit the CSR to a CA who
in turn issues a certificate.
switch:admin> seccertutil genkey
Generating a new key pair will automatically do the following:
1. Delete all existing CSRs.
2. Delete all existing certificates.
3. Reset the certificate filename to none.
4. Disable secure protocols.
Continue (yes, y, no, n): [no] y
Select key size [1024 or 2048]:
Generating new rsa public/private key pair
Done.