HP StorageWorks Fabric OS 5.X Command Reference Guide (AA-RVHVB-TE, September 2005)

540 Fabric OS commands
Deletes a QuickLoop.
Synopsis
qloopdelete “name“
Availability
admin
NOTE: This command requires HP Advanced Zoning license, which is included within the Base
Configuration Services and bundled with each B-series switch.
Description
Use this command to delete a QuickLoop.
This command changes the Defined Configuration. For the change to be preserved across switch reboots,
it must be saved to non-volatile memory using the cfgSave command. For the change to become
effective, an appropriate zone configuration must be enabled using the cfgEnable command.
NOTE: When security is enabled, this command can be issued only from the primary FCS switch.
Use this command only with Fabric OS 3.x systems in the fabric; QuickLoop is not supported in Fabric
OS 5.x.
Operands
The following operand is required:
Examples
To delete QuickLoop “qloop2”:
See also
qloopAdd
qloopCreate
qloopRemove
qloopShow
qloopDelete
name Specify the name of the QuickLoop, in quotation marks. This
operand is required.
switch:admin> qloopDelete "qloop2"