HP StorageWorks Fabric OS 5.X Command Reference Guide (AA-RVHVB-TE, September 2005)

Fabric OS 5.x command reference guide 537
Adds a member to a QuickLoop.
Synopsis
qloopadd “qloopname“, “member;member“
Availability
admin
NOTE: This command requires HP Advanced Zoning license, which is included within the Base
Configuration Services and bundled with each B-series switch.
Description
Use this command to add one or more members to an existing QuickLoop.
When a configuration is enabled, all QuickLoops defined in the configuration must resolve to one or two
switch worldwide names.
Zone alias names entered as members of this QuickLoop must be defined with WWNs. Zone alias names
that are defined by domain and port number, or AL_PA are not accepted as members of the QuickLoop.
NOTE: When security is enabled, this command can be issued only from the primary FCS switch.
Use this command only with Fabric OS 3.x systems in the fabric; QuickLoop is not supported in Fabric
OS 5.x.
Operands
The following operands are required:
Examples
To add an alias for a second WWN to “qlp1”:
See also
qloopCreate
qloopDelete
qloopRemove
qloopShow
qloopAdd
qloopname Specify the name of the QuickLoop, in quotation marks.
member Specify a list of QuickLoop members, in quotation marks,
separated by semicolons. Include one or more of the following:
• world wide names
• Zone alias names
switch:admin> qloopAdd "qlp1", "wwn2"