HP StorageWorks Fabric OS 5.X Command Reference Guide (AA-RVHVB-TE, September 2005)

528 Fabric OS commands
Displays information from portTest.
Synopsis
porttestshow [-ports itemlist]
Availability
admin
Description
Use this command to display a snapshot of information from portTest. The following information
appears:
• Pass or fail information on a given port
• Port type tested
• Current state of portTest (NO TEST, TESTING, or TEST DONE)
• Type of ports asked to test (ALL_PORTS, ALL_E_PORTS, ALL_L_PORTS, ALL_F_PORTS, ALL_LB_PORTS,
or SINGLE_PORT)
• Pattern used in testing
• Seed used in testing
• User delay value
• Total iteration asked to test
• Current test iteration
• Total fails on this test
• Consecutive fails on this test
• portTest start time
• portTest stop time
• Timeout value
• Error code if any
Operands
The following operands are required:
portTestShow
-ports itemlist Specify a list of user ports to test. By default, all the user ports in
the current slot will be assumed. See itemList help pages for
further details.