HP StorageWorks Fabric OS 5.X Command Reference Guide (AA-RVHVB-TE, September 2005)

Fabric OS 5.x command reference guide 519
Operands
This command has the following operands:
Examples
To display the basic set of statistics for a port:
fl_cls_rx
CLS received when OPEN.
fl_bb_stall
OPN/CLS BB_Credit stalls.
fl_cf_alloc
Number of CFIFOs allocated.
fl_cf_opn
CFIFOs delivered when OPENED.
fl_cf_full
Number of CFIFOs full stalls.
fl_cf_na
CFIFO not available stalls.
fl_trig_age
Number of age count triggers.
fl_trig_lp
Number of loop not busy triggers.
open
Number of times the FL_Port entered OPEN state.
transfer
Number of times the FL_Port entered TRANSFER
state.
opened
Number of times the FL_Port entered OPENED
state.
starve_stop
Loop tenancies stopped due to starvation.
fl_tenancy
Number of times FL_Port had loop tenancy.
nl_tenancy
Number of times NL_Port had loop tenancy.
frame_nozone
Frames rejected due to zone protection.
slotnumber For bladed systems only, specify the slot number of the port to be
configured, followed by a slash (/).
portnumber Specify a port number to be configured, relative to its slot for bladed
systems. Use switchShow to display a list of valid ports.
switch:user> portstatsshow 4/15
stat_wtx 494 4-byte words transmitted
stat_wrx 760 4-byte words received
stat_ftx 28 Frames transmitted
stat_frx 32 Frames received
stat_c2_frx 0 Class 2 frames received
stat_c3_frx 32 Class 3 frames received
stat_lc_rx 0 Link control frames received
stat_mc_rx 0 Multicast frames received
stat_mc_to 0 Multicast timeouts
stat_mc_tx 0 Multicast frames transmitted
(continued on next page)