HP StorageWorks Fabric OS 5.X Command Reference Guide (AA-RVHVB-TE, September 2005)

Fabric OS 5.x command reference guide 517
Clears the hardware statistics of a specified switch port.
Synopsis
portstatsclear [slotnumber/]portnumber
Availability
admin
Description
Use this command to clear the hardware statistics, including the AL_PA-based CRC monitor, end-to-end
monitor, and filter-based monitor statistics, for a specified switch port. For platforms with a Bloom-based
ASIC, the command also clears the hardware statistics for associated ports in the target port quad. For
platforms with a Condor-based ASIC, the command clears the hardware statistics only on the port
designated.
Operands
This command has the following operands:
Examples
To clear the statistics for a port:
See also
portStats64Show
portStatsClear
slotnumber For bladed systems only, specify the slot number of the port to be
configured, followed by a slash (/).
portnumber Specify a port number to be configured, relative to its slot for bladed
systems. Use switchShow to display a list of valid ports.
switch:admin> portstatsclear 4/15