HP StorageWorks Fabric OS 5.X Command Reference Guide (AA-RVHVB-TE, September 2005)

Fabric OS 5.x command reference guide 515
Operands
This command has the following operands:
Examples
To display the 64-bit hardware statistics for a port:
slotnumber For bladed systems only, specify the slot number of the port to be
configured, followed by a slash (/).
portnumber Specify a port number to be configured, relative to its slot for bladed
systems. Use switchShow to display a list of valid ports.
switch:user> portstats64show 4/15
stat64_wtx 0 top_int : 4-byte words transmitted
316 bottom_int : 4-byte words transmitted
stat64_wrx 0 top_int : 4-byte words received
1486 bottom_int : 4-byte words receive
stat64_ftx 0 top_int : Frames transmitted
69 bottom_int : Frames transmitted
stat64_frx 0 top_int : Frames received
73 bottom_int : Frames received
stat64_c2_frx 0 top_int : Class 2 frames received
0 bottom_int : Class 2 frames received
stat64_c3_frx 0 top_int : Class 3 frames received
37 bottom_int : Class 3 frames received
stat64_lc_rx 0 top_int : Link control frames received
8 bottom_int : Link control frames received
stat64_mc_rx 0 top_int : Multicast frames received
0 bottom_int : Multicast frames received
stat64_mc_to 0 top_int : Multicast timeouts
0 bottom_int : Multicast timeouts
stat64_mc_tx 0 top_int : Multicast frames transmitted
0 bottom_int : Multicast frames transmitted
tim64_rdy_pri 0 top_int : Time R_RDY high priority
60438254 bottom_int : Time R_RDY high priority
tim64_txcrd_z 0 top_int : Time BB_credit zero
2 bottom_int : Time BB_credit zero
er64_enc_in 0 top_int : Encoding errors inside of frames
0 bottom_int : Encoding errors inside of frames
(continued on next page)